Bentel Omnia 4 Bedienungsanleitung PDF herunterladen

BENTEL

USER MANUAL

Alarm Memory This is the history of the most recent violations that occurred the last time

when an alarm was triggered.

Arm To set the system into the ARMED mode. In this mode, a zone violation will

activate an alarm condition. If the system is programmed accordingly, it will

cause a reporting code to be sent to the central monitoring station.

Bypass To deactivate zone. When the panel is ARMED, violation of a bypassed

zone will be ignored.

Chime A short beep sound from the keypad to indicate a zone is violated.

Disarm To deactivate the system. FIRE, PANIC and MEDICAL remain active while

the system is disarmed.

Entry/Exit Zone A zone with programmable delay time will allow user to exit the premises

after arming the system and disarm by using the keypad after entering the

armed premises. This zone is generally the last exit point and the first entry

point of the building, i.e. the front door of a house.

Instant Zone When the system is armed, any violation of an instant zone will immediately

cause an alarm condition to be registered.

Zone A specific area of your premises guarded by sensors, which detect violations

of that area.

GLOSSARY

1 2 3 4 5 6 7 8 9 10

Inhaltsverzeichnis

Seite 1

1BENTEL USER MANUAL Alarm Memory This is the history of the most recent violations that occurred the last time when an alarm was t

Seite 2 - USER MANUAL

10BENTEL USER MANUAL SECURITY ZONE INFORMATION Zone No. Zone Type e.g. Entry/Exit Delay Location e.g. Main door

Seite 3

2BENTEL USER MANUAL UNDERSTAND YOUR KEYPAD INDICATORS ARMED INDICATOR (Red) The indicator is illuminated when the system is armed MEMORY INDICAT

Seite 4

3BENTEL USER MANUAL • Default User Code 1 [ 1234 ] Automatic Arm [User Code 1] + [On] Automatic Disarm [User Code 1] + [Off] Away Arm [User C

Seite 5 - (Leave via ENTRY/EXIT Zone)

4BENTEL USER MANUAL Enter User Programming Mode [User Code 1] + [ ] Exit User Programming Mode [ESC] Program New or Change Exist

Seite 6

5BENTEL USER MANUAL [USER CODE 1] + [ON] (Leave via ENTRY/EXIT Zone) 1. Ensure that all zone indicators are distinguished; if not, check tha

Seite 7

6BENTEL USER MANUAL 1. Your system can be remotely ARM from outside the house through any normal DTMF telephone or GSM hand phon

Seite 8

7BENTEL USER MANUAL [User Code 1] + [ ]+[ Zone Status ]+ [ OFF / ON ]+[ ] 1. Enter the [User Code 1] and press enter.

Seite 9

8BENTEL USER MANUAL [User Code 1] + [ ]+[ View Logger ]+ [ ] 1. The system alarm memory will be store up to

Seite 10

9BENTEL USER MANUAL [User Code 1] + [ Program Tel. Num. ] + [Telephone Numb. 1 ] + [01X-XXXXXXX ] + [ ] 1. Enter the [User Code

Weitere Dokumente für Sicherheitszugriffskontrollsysteme Bentel Omnia 4

Um das Dokument anzuzeigen Bentel Omnia 4 Spezifikationen

Bentel Omnia 4 Spezifikationen (112 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Bentel Omnia 4 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sicherheitszugriffskontrollsysteme Bentel Omnia 4 herunter. BENTEL USER MANUAL Alarm Memory This is the Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Sicherheitszugriffskontrollsysteme Bentel Omnia 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Bentel Omnia 4