Bentel Omnia 4 Spezifikationen PDF herunterladen (Seite 63)

Installer code

The installer Code PIN is of utmost importance as it can access and

change, via remote or local PC or keypad, all the Control panel parameters

(except User Code PINs). The Installer Code PIN can be changed via key-

pad, modem or PC.

Current Installer

Code PIN

The Installer Code PIN (for downloading to the connected control panel)

must be entered in the relevant field. If the entered Installer Code PIN does

not match the programmed PIN ----the request for New Installer Code PIN

will be revoked.

Change Current

Change the current Installer Code PIN as follows.

1. Enter New Installer Code PIN in the relevant field on the lower part of the

window.

2. Confirm New Installer Code PIN (double entry is required as protection

against errors).

3. Send the New Installer Code PIN to the connected Control panel.

Firmware release Select the Load button to view the Firmware release of the Control panel.

Figure 35 Installer Code page

PROGRAMMING 63

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 111 112

Keine Kommentare

Bentel Omnia 4 Spezifikationen Seite 63